플라스틱/고무

No.258-UTL IMPACT TESTER（WITH ULTRA LOW TEMP.REFRIGERATING MACHINE）

by igms posted Feb 22, 2019
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

가 크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
국제규격 JIS-K7110、K7111、ASTM-D256、D6110、ISO-179、180
제품명 No.258-UTL IMPACT TESTER（WITH ULTRA LOW TEMP.REFRIGERATING MACHINE）
기능 With the same funtionality, test method compatibility and options of No.258-L, No.248-UTL can lower the chamber temperature to exterme temperatures, as low as -50℃.
제품사양 -Temperature Range : -50 °C to 60 °C (Refrigerator)
-Safety Device : Hammer Setting Sensor (Interlock System on the Upper Door), Acrylic Safety Cover
-Additional Specifications : Refer to the below table
-Option : Software, Electric Hammer Release Device, Torque Adjustment Device (Only for Izod)
-Power Source : AC 200 V, 3-Phase, 30 A, 50/60 Hz
-Dimensions/ Weight (Approx.) : W1,220 × D990 × H1,660 mm, 350 kg

[Test Method : Charpy Impact Tester ]
-Reference Standards : JIS-K7111, ISO-179, ASTM-D6110
-Capacity : 0.5, 1, 2, 4, 5, 7.5, 15, 25 J
-Lift-up angle :150°
-Impact speed (m/s)* :2.9, 3.8 (3.46)
-Striking Edge Angle * : 30 ± 1° (45 ± 2°)
-Striking Edge Radius (mm)* :R2 ± 0.5 (R3.17 ± 0.12)
-Anvil-Edge Distance (mm)* :–
-Support Length (mm)* :62 + 0.5 (101.6 ± 0.5)
-Accessories : Specimen setting gauge, Block gauge, Torque wrench (Izod only)

[Test Method : Izod Impact Tester ]
-Reference Standards :JIS-K7110, ISO-180, ASTM-D256
-Capacity : 1, 2.75, 5.5, 11, 22 J
-Lift-up angle :150°
-Impact speed (m/s)* : 3.5 (3.46)
-Striking Edge Angle * :75° (-)
-Striking Edge Radius (mm)* :R0.8 (R0.79 ± 0.12)
-Anvil-Edge Distance (mm)* :22 ± 0.2 (22 ± 0.05)
-Support Length (mm)* :–
-Accessories : Specimen setting gauge, Block gauge, Torque wrench (Izod only)

*JIS/ISO Standard Value (ASTM Standard Value)

258-UTL-300x300.jpg

 

Option : Acrylic Safety Cover

위로 아래로 댓글로 가기 인쇄