플라스틱/고무

No.258 IMPACT TESTER

by igms posted Feb 22, 2019
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

가 크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
국제규격 JIS-K7110、K7111-1、ASTM-D256、D6110、ISO-179-1:2010、180
제품명 No.258 IMPACT TESTER
기능 This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil.
제품사양 -Test method : Charpy Impact Tester
-Reference Standards : JIS-K7111, ISO-179, ASTM-D6110
-Capacity : 0.5, 1, 2, 4, 5, 7.5, 15, 25 J
-Lift-up angle :150°
-Impact speed (m/s)* :2.9, 3.8 (3.46)
-Striking Edge Angle* : 30 ± 1° (45 ± 2°)
-Striking Edge Radius (mm)* :R2 ± 0.5 (R3.17 ± 0.12)
-Anvil-Edge Distance (mm)* : -
-Support Length (mm)* :62 + 0.5 (101.6 ± 0.5)
-Accessories : Specimen setting gauge, Block gauge, Torque wrench (Izod only)
-Option :Software, Safety Cover, Hammer Release Device, Curtain for Litter Control
-Power Source : AC 100 V, 1-Phase, 3 A, 50/60 Hz
-Dimensions/Weight (Approx.) :W550 × D350 × H850 mm, 100 kg


-Test method : Izod Impact Tester
-Reference Standards : JIS-K7110, ISO-180, ASTM-D256
-Capacity :1, 2.75, 5.5, 11, 22 J
-Lift-up angle :150°
-Impact speed (m/s)* : 3.5 (3.46)
-Striking Edge Angle* :75° (-)
-Striking Edge Radius (mm)* : R0.8 (R0.79 ± 0.12)
-Anvil-Edge Distance (mm)* :22 ± 0.2 (22 ± 0.05)
-Support Length (mm)* : –
-Accessories : Specimen setting gauge, Block gauge, Torque wrench (Izod only)
-Option : Software, Safety Cover, Hammer Release Device, Curtain for Litter Control
-Power Source :AC 100 V, 1-Phase, 3 A, 50/60 Hz
-Dimensions/Weight (Approx.) :W550 × D350 × H850 mm, 100 kg

258-300x300.jpg

 

위로 아래로 댓글로 가기 인쇄