| Rack | 11teeth10valleys |
| Height of teeth | 4.75 ± 0.05 mm |
| Tooth spacing | 8.50 ± 0.05 mm |
| Tooth width | 19 mm |
| Comb | 10prongs |
| Prong length | 19 mm |
| Prong thickness | 3.4 ± 0.1 mm |
플라스틱, 고무, 신발, 가죽, 섬유등 다양한 분야의 시험/측정장비
| 첨부 '2' |
|---|
| 국제규격 | TAPPI T809 |
|---|---|
| 제품명 | GT-6011-3-1 Rack & Comb (Cmt) |
| 기능 | This test method describes a procedure for measuring the crushing resistance of a laboratory fluted strip of corrugating medium (CMT), and provides a means of estimating, in the laboratory, the potential flat crush resistance of a corrugated board. |
| Rack | 11teeth10valleys |
| Height of teeth | 4.75 ± 0.05 mm |
| Tooth spacing | 8.50 ± 0.05 mm |
| Tooth width | 19 mm |
| Comb | 10prongs |
| Prong length | 19 mm |
| Prong thickness | 3.4 ± 0.1 mm |
GT-6023 Corrugated Cardboard Specimen Cutter
GT-7016-J Paper Cutter
GT-6020-D Neckdown Cutter
GT-6020 Flat Crush Specimen Cutter
GT-6019-B Butterfly Form Specimen Cutter
GT-6019-A Parallel Cutter
GT-6018 Die Cutter
GT-7055-AD Digital Elmendorf Tearing Strength Tester
GT-7055-A Elmendorf Tearing Strength Tester
GT-7055 Elmendorf Tearing Strength Tester
GT-7034-T1 Ink Rub Tester
GT-6022-D Internal Bond Tester
GT-6022 Internal Bond Tester
GT-6016 Water Repellency Tester
GT-6014-A Mit Folding Endurance Tester
GT-6012 Puncture Tester
GT-6011-2 Edgewise Compression Fixture
GT-6011-3-1 Rack & Comb (Cmt)
GT-6011-2-2 Metal Guide Blocks (Ect)
GT-6011-2-1 Fluted Crush Specimen Holder (Cfc)
지엠에스(GMS) 경기도 용인시 기흥구 동백중앙로 16번길 16-4, 에이스동백타워 1동 409호
TEL : 031-274-3094 FAX : 031-281-5590 | 사업자등록번호 : 113-20-83455 | help@i-gms.com
GT-6011-2 Edgewise Compression Fixture
GT-6011-2-2 Metal Guide Blocks (Ect)
