| Model | A | B | C |
| Specimen | 80×25mm/50×150mm | ||
| Needle diameter | Ø3.5±0.1mm | Ø2.0±0.1mm | Ø3.0±0.1mm |
| Needle pitch | 17.6±0.1mm | 12.0±0.1mm | 15.0±0.1mm |
| Weight (approx.) | 1180g | 850g | 1030g |
| Dimensions(W×D×H) | 13x8x5 cm | 10×8×5 cm | 11×8×5 cm |
종이
GT-6011-1 Pin Adhesion Attachment
by igms posted Mar 06, 2019
| 국제규격 | CNS-3327、GB/T 6548、JIS-Z0402、GB/T 6544-2008、JIS Z1516: 2003 |
|---|---|
| 제품명 | GT-6011-1 Pin Adhesion Attachment |
| 기능 | This attachment is used for determining the adhesive strength of the single wall (double faces) corrugated board after being glued. |
Articles
-
GT-7018 Cord Flexibility Tester
-
GT-7301 Flexible cable flexing tester
-
GT-7301-HMI Flexible Cable Flexing Tester
-
GT-7062-A Cord Bending Tester
-
GT-7062 Plug Bending Tester
-
GT-7309 Dielectric & Insulation Tester
-
GT-7067-N1 Yarn Sample Winder
-
GT-7025-A Wrap Reel Tester
-
GT-7022-3 Scorch Tester
-
GT-7021 Standard launder tester
-
GT-230/100-C Sample Cutter
-
GT-7034-A6 Steel Wire Fatigue Tester
-
GT-7516 Elastics Fatigue Tester
-
GT-7012-HZ Rotary Abrasion Tester
-
GT-7002-DL Large-Sized Vibration Teater
-
HK-300 Paper Moisture Tester
-
GT-6015 Water Absorption Tester
-
GT-6011-1 Pin Adhesion Attachment
-
GT-7003-BL Large-Sized Drop Tester
-
GT-7003-B1 Drop Tester