고무

M-3000AU Moving Die Rheometer

by igms posted Mar 04, 2019
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
국제규격 GB/T 16584-1996, ISO 6502-3-2018, ASTM D5289-2017
제품명 M-3000AU Moving Die Rheometer
기능 The rheometer can simultaneously determine the viscosity, elasticity, hysteresis loss and curing rate during the vulcanization process of the rubber compound.
제품사양 The M-3000AU moving die rheometer is an accurate moving die rheometer with sealed biconical dies.
It is an ideal instrument for determining the curing characteristics of rubber compounds including scorch time, cure time, cure rate, maximum torque, minimum torque and other vulcanization characteristics for quality control, research and development.
Using high precision temperature control system, advanced amplifier system with high speed sampling rate and PC based dedicated software, the M-3000AU provides a reliable and easy to use solution for analysis of vulcanization curve.
Die configuration  Sealed die
Test mode  MDR
Temp. control  PID control
Temp. range  Ambient temp. to 200℃
Temp. display resolution  0.1℃
Temp. control stability  ±0.1℃
Temp. accuracy  ≤±0.3℃
Temp. recovery time  ≤45 sec
Heating time  Ambient temp. to 190℃ < 6 min
Torque range  200 dN-m
Torque display resolution  0.001 dN-m
Torque unit  dN-m, kgf-cm, lbf-in
Oscillation amplitude  ±0.5°【optional:±1.0° , ±2.0° , ±3.0°】
Oscillation frequency  1.67Hz±0.01Hz
Controller  U70 control system
Software  Evolution
Communication interface  RJ45
Motor  Brushless DC motor
Compressed air  3.5kg/c㎡ (0.35MPa) (prepared by customer)
Dimension (W×D×H)  70×85×130 cm
Power  1∮ AC 220V 50/60Hz 2kW (or specify)

 

 

M-3000AU(1).jpg

 

 

M-3000AU(2).jpg   M-3000AU(3).jpg  M-3000AU(4).jpg