플라스틱

GT-7049-DH3 Creep Tester

by igms posted Mar 06, 2019
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
제품명 GT-7049-DH3 Creep Tester
기능 This instrument is designed to measure the creep and stress relaxation of plastic material under temperature from 0℃ to 150℃. A) With a specified temperature, preload a given stroke (0 to 30mm) to the specimen.
Item Specification
Capacity 10kN
Load Resolution 1/65,000
Force Resolution 0.15N
Load Accuracy ±0.5%
Stroke 0.001~30.000 mm
Stroke Accuracy 0.01mm(magnetic railings ruler)
Preload Speed 1.0mm/min
Specimen Thickness T=1.0~5.0mm
Test Temperature 0.0~150.0℃
Temperature Accuracy ±2.0℃
Temperature Uniformity +/-1.0%(F.S)
Control System PLC control & HMI system
Temperature Contro BTC control system / P.I.D and SSR
Freezing System Hermetic compressor, single stage system and eco-friendly refrigerant
Cooling Method Air cooling
Heating System Hot air circulating system
Outer Surface Staneless varnish
Heat Preservation Material Hard foam and thermal insulation foam
Observation Window Vacuum insulated glass window (5 layers) with lighting
Dimension (W×D×H) 1100×900×1700 mm (W×D×H)
Power 1∮, 220V, 50/60 Hz

 

GT-7049-DH3.jpg

 

GT-7049-DH3-2.jpg